2021年12月12日日曜日

Analysis of Tube Blocking of Liquid Storage Dryer in Automobile Air Conditioner

 

The function of desiccant in automobile air-conditioning is to absorb water in the refrigeration system. When using desiccant in automobile air-conditioning refrigeration system, special attention should be paid to high strength and low wear. The desiccant should also have good compatibility with the refrigerant. High-quality molecular sieves have high strength, low abrasion and good water absorption. Therefore, molecular sieves are mainly used as desiccants in automotive air conditioners. The fake and inferior liquid storage dryers use inferior and cheap desiccants (such as anhydrous calcium chloride, silica gel, etc.) due to their poor strength, easy to cause breakage and pulverization, and poor water absorption, so they often use refrigeration systems Blocked.

The sight glass has two functions: one is to indicate whether there is enough refrigerant in the system; the other is to indicate whether there is water in the refrigerant. The sight glass should be made of materials resistant to corrosion by refrigerants and sealed. There are two assembly methods: sintered and screw-in. The sight glass of the counterfeit liquid storage dryer is made of materials that are not resistant to refrigerant corrosion, resulting in poor sealing and refrigerant leakage.

When there are too many impurities or desiccant in the liquid storage dryer and the suction pipe is blocked, the cooling effect will decrease, and there is a significant temperature difference between the inlet and outlet of the liquid storage dryer. At this time, the liquid storage dryer must be replaced. Due to the different performances of the two refrigerants, HFC-134a and CFC-12, different receiver dryers are required and cannot be mixed. The storage dryer suitable for HFC-134a should use XH-7 molecular sieve as the desiccant, and the O-ring of the connection port should be made of materials with good compatibility with HFC-134a. Since the car air conditioner is installed on the car, the car is bumpy and vibrated greatly during the driving process, so it cannot be connected with rigid metal, but can only be connected with a flexible rubber hose.

。For automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article:Analysis of Tube Blocking of Liquid Storage Dryer in Automobile Air Conditioner

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank

Share: